릴리스 노트
버전마다 바뀐 점을 최신 버전부터 보여 줘요. 모두 비공개 베타 빌드이고, 노트는 앱과 함께 나온 그대로예요.
macOS 14 이상 · Apple Silicon 및 Intel
0.12.1 (26)최신
every menu and setting explained
영어로 작성된 노트예요.
- Help now has a page for every menu (MACfan, View, Cooling, Help), the menu-bar panel, each Settings group and the main buttons: what each item does, when to change it and its default, with an Open this button. Every Settings group has a question mark that opens its page, and every row shows a short tooltip. The tour adds two stops, for the menus and for Settings.
0.12.0 (25)
help that teaches
영어로 작성된 노트예요.
- New Help (Command-?): seven short lessons with drawings, from "MACfan always hands the fans back" to the command line, each with a Try it button that opens the right place, and a search that ignores accents.
- The first-run guide now has five simple pages: what MACfan reads and does not read, allowing fan control (it moves on by itself once macOS approves), a real 10-second test that only runs when you press it and then hands the fans back, the menu-bar sensor, and where help lives.
- A short tour walks through the main window (Help › Take the Tour), and Command-/ lists every shortcut. Command-1 to Command-4 jump between Overview, Sensors, Presets and History.
- MACfan now shows Simpel as its studio, with Support, Privacy, Terms, Refund and Pricing links in Settings › About.
0.11.0 (24)
see why, switch by itself, command line
영어로 작성된 노트예요.
- Every fan now says in plain words why it is doing what it is doing: handed back to macOS after a safety stop, waiting for the helper, held at a speed by a preset, stopped because the Mac is cool, and so on. Agents read the same sentence in
status.fanReasons. - After the Mac wakes, the preset that was running is applied again a few seconds later, unless you changed it, another app holds the fans, or a sensor is at 95 °C or more. Sleep still hands the fans back to macOS first. Switch it off in Settings › Fan control.
- History shows when macOS slowed the Mac for heat, as a strip under the temperature chart with a one-line summary for the range you picked. An optional notification tells you when it starts (Settings › Alerts).
- New Settings › Automation: presets can switch by themselves when the Mac goes on or off the charger, or during quiet hours. The first matching rule wins; a preset you pick by hand stays until the next change, and nothing is applied just because MACfan started. It is off until you turn it on.
- New
macfancommand line: status, presets, apply a preset by name, Automatic, a fixed speed, any native command. Settings › Fan control › Command line copies the one-line command that installs it. Shortcuts can run it with Run Shell Script.
- Every fan now says in plain words why it is doing what it is doing: handed back to macOS after a safety stop, waiting for the helper, held at a speed by a preset, stopped because the Mac is cool, and so on. Agents read the same sentence in
0.10.2
several temperature alerts
영어로 작성된 노트예요.
- Alerts can now watch several sensors, each with its own limit (up to eight): Settings › Alerts shows one row per alert with the sensor, the limit and a remove button, plus Add alert. Every alert keeps its own state, so a warm GPU does not hold back the CPU alert. Your existing alert is the first row, unchanged. Agents set the extra alerts with
settings_updatealertRulesand read each one instatus.alert.rules.
- Alerts can now watch several sensors, each with its own limit (up to eight): Settings › Alerts shows one row per alert with the sensor, the limit and a remove button, plus Add alert. Every alert keeps its own state, so a warm GPU does not hold back the CPU alert. Your existing alert is the first row, unchanged. Agents set the extra alerts with
이 사이트를 만들 때 MACfan 저장소에서 읽어 왔어요. 99dfa19